Products

HEX

Lugs & Thimbles

Lugs & Thimbles are essential electrical and mechanical accessories used for secure cable termination, connection, and protection in wiring and load-bearing applications.

Cable Gland & Accessories

Cable Glands & Accessories are essential components used for secure cable entry, sealing, anchoring, and protection in electrical panels and equipment. They ensure cables are properly fixed while preventing dust, moisture, vibration, and strain damage.

Crimping Tools

Crimping Tools are professional hand and hydraulic tools used for securely attaching lugs, terminals, and connectors to electrical cables. They ensure strong mechanical bonding and reliable electrical conductivity, making them essential for safe and long-lasting connections.

Earthing & Lightning Procection

Earthing & Lightning Protection systems are designed to safeguard electrical installations, equipment, and human life from electrical faults, short circuits, and lightning strikes. These systems safely dissipate excess electrical energy into the ground, preventing damage and ensuring reliable operation.

Connectwell

Terminal Blocks & Accessories

Terminal Blocks & Accessories are essential components used in electrical panels and control systems to connect, organize, and manage wiring efficiently. Terminal blocks provide secure connection points for wires, while accessories such as end clamps, end plates, markers, and jumpers help improve safety, organization, and reliability.

Relay Cards

Relay Cards are electronic control modules used in electrical panels and automation systems to control multiple electrical circuits through relay switching. They act as an interface between control signals and high-power devices, allowing safe and efficient operation of equipment.

Controlwell

Cable Gland & Accessories

Flexible Conduit Pipes

Flexible Conduit Pipes are protective tubing solutions designed to safeguard electrical wires and cables from mechanical damage, moisture, dust, and harsh environmental conditions. Their flexible design allows easy routing around bends and tight spaces, making installation quick and convenient.

Drag Chains

Drag Chains, also known as Cable Carrier Chains, are specially designed systems used to guide and protect moving cables and hoses in dynamic applications. They prevent tangling, bending stress, and mechanical damage while ensuring smooth and safe cable movement.

HPL

Wire & Cables

Wire & Cables are essential electrical components used for safe power transmission, signal communication, and equipment connectivity across residential, commercial, and industrial systems. Designed for high conductivity and durability, they ensure stable performance even in demanding environments.

Switchgears

Switchgears are critical electrical devices used to control, protect, and isolate electrical circuits and equipment. They ensure safe power distribution by preventing overloads, short circuits, and faults, helping maintain reliable system performance.

Meters

Meters are precision instruments used to measure, monitor, and display electrical parameters such as voltage, current, power, energy, and frequency. They help ensure accurate system performance, efficient energy usage, and safe operation of electrical equipment.

Trinity Touch

Lugs & Thimbles

Lugs and thimbles are essential electrical accessories used for safe and secure wire termination in control panels and industrial wiring. Copper cable lugs provide a strong connection between heavy-duty cables and electrical equipment, ensuring efficient current flow and long-term reliability.

Din Rail / MCB Channel

DIN rails are standardized metal mounting rails used inside electrical control panels to securely hold components like terminal blocks, relays, MCBs, PLC modules, and power supplies. Made from galvanized steel or aluminum, they provide a strong, organized base that allows quick installation and easy maintenance.

PVC Ducts/Channels

PVC Ducts / Channels are cable management systems used in electrical panels and control cabinets to organize and route wires neatly. They help protect cables, improve airflow inside panels, and make maintenance easier.

Relay Cards

Relay cards are electronic interface modules used in automation and control panels to switch electrical loads through PLC or control signals. They consist of multiple relays mounted on a PCB with terminal blocks for easy wiring, LED indicators for status monitoring, and secure mounting options.

Enclosures

High-quality industrial electrical enclosures designed to protect control panels, wiring, and electronic components from dust, moisture, and harsh environments. Built using durable materials like mild steel, stainless steel, and polycarbonate, these enclosures come in wall-mounted, floor-standing, weatherproof, and explosion-proof designs.

Plugs & Sockets

Industrial plugs and sockets are durable electrical connectors used to safely supply power between equipment and power sources. Designed with high-quality insulating materials and robust metal contacts, they provide secure connections, protection against dust and moisture (IP-rated), and reliable performance in industrial environments.

SMPS

SMPS is an electronic power supply that converts AC input voltage into stable DC output using high-frequency switching technology. It is widely used in control panels, PLC systems, automation equipment, LED lighting, and industrial electronics because of its high efficiency, compact size, and low heat generation.

SGI Wiring Solutions

PVC Ducts/Channels

A grey plastic cable-management duct used to organize and protect electrical wiring inside control panels. It features side slots that allow easy routing and branching of wires, along with a removable snap-on cover for a clean and secure finish.

Ties Base

Tie Bases are small mounting accessories used to secure and organize cables inside electrical panels, control cabinets, and wiring systems. They provide a fixed point where cable ties can be attached, helping keep wires neat, stable, and properly routed.

Marking Sleeves

Marking Sleeves are identification accessories used in electrical panels and wiring systems to label and organize cables and wires. They help technicians quickly identify circuits, making installation, maintenance, and troubleshooting easier and more efficient.

Spiral Sleeves

Spiral Sleeves are flexible cable management accessories used to bundle and protect multiple wires and cables in electrical panels, control cabinets, and industrial installations. Their spiral design allows easy insertion and removal of wires at any point along the sleeve.

Wire & Cables

Surelock

Cable Ties

Cable Ties are fastening accessories used to bundle and organize wires and cables in electrical panels, control cabinets, and industrial installations. They help keep wiring neat, secure, and properly arranged, improving safety and maintenance.
Made from high-quality nylon, cable ties are strong, flexible, and resistant to heat and corrosion, ensuring reliable performance in electrical and industrial environments.

Platec

Heat Shrink Sleeve for Busbar

Heat Shrink Sleeves for Busbars are insulating tubes used to cover and protect copper or aluminum busbars in electrical panels and switchgear systems. When heat is applied, the sleeve shrinks tightly around the busbar, providing strong insulation and protection.
These sleeves help prevent short circuits, electrical faults, and accidental contact, while also improving safety and reliability in power distribution systems.

Encoz

3-Point Lock

A 3-Point Lock is a robust locking mechanism designed to secure electrical panel boards, cabinets, and industrial enclosures. It locks the door at three different points (top, middle, and bottom) simultaneously, ensuring stronger protection and a tight seal.

Fan Filter

A Fan Filter is used in electrical panels and industrial enclosures to provide efficient ventilation and cooling. It allows fresh air to enter the cabinet while filtering dust and particles, helping maintain a safe operating temperature for internal components.

Door Handles

Door Handles are designed for electrical panels, control cabinets, and industrial enclosures to provide secure and convenient access. They ensure smooth opening and closing of panel doors while maintaining a firm locking mechanism for safety.

Meter Glass

Meter Glass is a transparent viewing window installed in electrical panels and control cabinets to allow easy monitoring of meters and indicators without opening the enclosure. It helps protect internal electrical components from dust, moisture, and accidental contact while maintaining clear visibility.

Minilec

Announciators

Annunciators are alarm indication devices used in electrical control panels and industrial systems to provide clear visual and audible alerts when a fault or abnormal condition occurs. They help operators quickly identify problems such as equipment failure, overload, or system malfunction.

Protection Relays

Protection Relays are advanced electrical devices used to detect faults and abnormal conditions in power systems. They continuously monitor parameters such as current, voltage, and frequency, and when a fault is detected, the relay sends a signal to trip the circuit breaker, protecting equipment and preventing system damage.

Timers

Timers are electronic control devices used in electrical panels and automation systems to manage time-based operations. They allow circuits or equipment to switch ON or OFF after a preset time delay, helping automate processes and improve system efficiency.

FTC

Neutral Links

Neutral Links are electrical components used in distribution boards and control panels to provide a common connection point for multiple neutral wires. They help organize wiring and ensure safe and efficient distribution of the neutral line within electrical systems.

Standard Connection Plate

A Standard Connection Plate is a metal mounting plate used in electrical panels and industrial enclosures to support and organize electrical connections. It provides a stable base for mounting terminals, connectors, and other electrical components inside the panel.

Terminal Blocks

Terminal Blocks are electrical connectors used in control panels and distribution boards to securely connect and manage multiple wires. They provide a safe and organized connection point, making wiring, maintenance, and troubleshooting easier.

Push Buttons

Push Buttons are control switches used in electrical panels and industrial automation systems to start, stop, or control machines and processes. They allow operators to easily operate equipment by pressing the button, sending a command to the connected system.

Push Button Station

A Push Button Station is a control device used to operate industrial machines and electrical equipment. It contains one or more push buttons mounted in a protective enclosure, allowing operators to safely start, stop, or control machinery.

Mourvi

Ligting Hooks

Lighting Hooks are sturdy mounting accessories used to hang or support lighting fixtures in electrical panels, ceilings, and industrial installations. They provide a reliable suspension point to safely hold lights, lamps, or small equipment.

Self Adhesive Gaskets

Self Adhesive Gaskets are sealing strips used in electrical panels, enclosures, and cabinets to protect internal components from dust, moisture, and air leakage. They create a tight seal between the panel door and frame, improving protection and insulation.

Rubber Gromets

Rubber Grommets are protective fittings used in electrical panels, enclosures, and equipment to safely pass cables or wires through metal openings. They help prevent damage to wires by covering sharp edges and reducing friction.

Locks

Locks are security devices used in electrical panels, control cabinets, and industrial enclosures to ensure safe and restricted access to internal components. They help protect electrical equipment from unauthorized handling while keeping the panel securely closed.

Hinges

Hinges are essential hardware components used in electrical panels, cabinets, and industrial enclosures to support the opening and closing of doors. They provide a strong pivot connection between the door and the frame, ensuring smooth movement and reliable operation.

Insulation Sheet

Insulation Sheets are used in electrical panels, switchboards, and industrial equipment to provide reliable electrical insulation and protection. They help prevent electrical leakage, short circuits, and accidental contact with live parts, ensuring safe operation of electrical systems.

PG Gland

PG Glands are cable entry devices used in electrical panels, control cabinets, and industrial enclosures to securely hold and seal cables. They ensure safe cable routing while protecting the enclosure from dust, moisture, and environmental damage.

DMC/SMC Finger Support

DMC / SMC Finger Supports are insulating components used in electrical panels and switchgear systems to support and separate busbars safely. They help maintain proper spacing between conductive parts, preventing short circuits and ensuring safe electrical insulation.

DMC/SMC L Support

DMC / SMC L Supports are insulating components used in electrical panels and switchgear to securely support busbars while maintaining proper insulation and spacing. The L-shaped design provides strong mechanical stability and ensures safe mounting of busbars inside the panel.

DMC/SMC Conical Support

DMC / SMC Conical Supports are insulating components used in electrical panels and switchgear systems to support busbars and maintain proper electrical insulation. Their conical shape provides strong mechanical stability while keeping conductive parts safely separated from the panel structure.

Thermostate

Thermostats are temperature control devices used in electrical panels and industrial enclosures to regulate internal temperature. They automatically switch heating or cooling devices on or off when the temperature reaches a preset level, helping maintain safe operating conditions.

Space Heater

Space Heaters are used in electrical panels and control cabinets to prevent moisture buildup and condensation inside the enclosure. They maintain a stable internal temperature, protecting electrical components from humidity, corrosion, and malfunction.

Screw Knobs

Screw Knobs are hand-tightening components used in electrical panels, machines, and industrial equipment to secure or adjust parts without using tools. Their ergonomic design allows easy gripping and quick tightening or loosening by hand.

Legend Plates

Legend Plates are identification labels used in electrical panels and control systems to clearly indicate the function of switches, push buttons, and indicators. They help operators quickly understand the purpose of each control, improving safety and ease of operation.